13313028229联系我们
名称：保定市检查井模具厂
电话：xxx
手机：13313028229
邮箱：xxx
地址：xxx
新闻动态
塑料检查井的使用范围
塑料检查井的使用范围
Scope of use of plastic inspection wells
作为环保材料之一的塑料检查井的应用是非常广泛的，但是却也不是每个地方都能使用的，要满足一定的条件才能够保证塑料检查井起到应有的作用。那么哪些是满足塑料检查井的使用条件呢？
As one of the environmental protection materials, the application
of plastic inspection wells is very extensive, but it can not be used in
every place. To meet certain conditions, it can guarantee the function
of the plastic inspection well. So what are the conditions to meet the
requirements of plastic inspection wells?
其一，建筑小区、城乡市政、工业园区、旧城改造等范围内埋地塑料排水管道外径不大于1200mm、埋设深度不大于8m的塑料排水检查井工程的设计、施工和维护保养。
First, the design, construction and maintenance of the plastic
drainage inspection well is not more than 1200mm and the buried depth is
not more than 8m in the area of building, urban and rural municipal,
industrial park and old city reconstruction.
其二，一般土质、软土土质、季节性冻土土质和湿陷性黄土土质条件下的塑料排水检查井施工。
Secondly, the construction of plastic drainage well for general
soil, soft soil, seasonal frozen soil and collapsible loess soil.
Furthermore, there are areas where the seismic fortification degree
is below 9 degrees and below 9 degrees. The ground load in the general
lane is based on the total weight of 15t (back wheel pressure 5T); the
ground load of the fire lane is designed according to the total weight
of the car 30t (the rear wheel pressure 6T) and the ground water level
is not more than 1.0m under the ground. Plastic inspection wells can be
used to meet the above requirements